Skin2 Elective Seminar // Biocouture// Bioplastics

Master in Advanced Architecture – Skin2 Seminar Final Presentations
SO.18 – Elective Seminar

What will the human of the future be like? Focusing on the human skin, as a means for protection but also a mediator of our senses and the environment, the Master in Advanced Architecture seminar Skin2 led by Manuel Kretzer and Anastasia Pistofidou, wanted to look into ways of creating novel interactions and bodily experiences.MAA students experimented with raw materials and recipes to create thin membranes and surfaces, which were further supplemented through embedded electronics. Besides developing advanced material systems, a crucial task for the students was been to think about the practical applications and implications of a second skin.

PROJECTS

ENCRYPTED BIOMETRICS

by Jonathan Irawan, Lalin Keyvan, Jean Sebastian Munera and Connor StevensSKINS2 - Encripted Biometrics - IAAC - 2What we envision as a result of the new skin, is that the world will no longer be defined by political or geographical boundaries, but rather territories of health zones to maintain certain liveability aspects. Whether this is a good outcome or not we shall tell. Another result of the skin is the development of a new sense, a sixth sense.As a design, pockets to analyse blood and a vein network were to combined as the encrypted biometric skin.

Video SKINS2 – Encypted Biometrics

BIO[LUM]SKIN

by Thora H. Arnardottir, Noor Elgewely, Jessica Dias, Ingried Ramirez11We imagine a future that is completely dark. Where humans have evolved into an altered state of organisms, forming a different species interdependent on each other. Our concept for the skin was to create a new organ as an extension of the human body. We want to host living organisms on our second skin to illuminate the otherwise invisible creatures from the deep sea.We dried the bio-plastic cast on a mannequin in order for it to take the contour of the body and spine. The geometry of this wearable was developed from the hand sketches, and then translated into a 3D model using Rhino.

Video BIO(lum)SKIN

MIURA ORI SKIN

by Jengrung Hong, Sameera Chukkapalli, Hsin Li, Tanuj Thomas83-730x516Based on the final system for the proposed skin design, the Material and Fabrication techniques decided are as follows: Fabric: Laser cutting / Folding, Thermochromics: Screen Printing, 3D Printing: SLS nylon / Mold casting. The Miura fold is a form of rigid origami, meaning that the fold can be carried out by a continuous motion in which, at each step, each parallelogram is completely flat.

Video Miura Ori Skin

VOIDSKIN

by Robert Chacon, Khushboo Jain, Christopher Wongvoidskin-page-7-960BanteringDynamics is pleased to introduce an innovative weapons paradigm that will revolutionize the global battle against crime and disorder. VOIDSKIN (Variable Organic/Inorganic Differentiation System K_________ Inhibition N_________) transparently protects security personnel from the deleterious effects of VOID weapons technology through the thermoreaction of shielding picoparticles to the instantaneous pseudoabsolute zero generated by the discharge of a VOID weapon. VOIDSKIN’s triple layering system redundantly ensures protection against dematerialization while incorporating thermonegative resistance to plasma weapons.

Video Voidskin

EL AMOR EN LOS TIEMPOS DEL CÓLERA

by Justyna Brzakala, Lina Salamanca,Dirk Van Wassenaer, Pedro Levit ArroyoIMG_1046We will create a membrane which permits people to maintain intimacy without therisk of contamination.Intimate relationships allow a social network for people to form strong emotional attachments. These relationships involve feelings of liking or loving one or more people, romance, physil or sexual attraction, sexual relationships, or emotional and personal support between the members.

Video El Amor Ee Los Tiempos Del Cólera

RE[SKIN]ULATE – [ION]TEX

by Sahana Sridhar, Nisarg sheth, Anastasia Stephany

09What we need is a second skin that could produce or attract negative ion for our body. Therefore we try to invent a new material which we named [ION]-TexFrom all the experiment and research, it was figured that the best way to achieve our goal is to combine few steps with turpentine and graphene with the silicon mold, to make sure that the prototype could work. This material that we found could be produce as vary products such as blanket, mask, belt, etc.

Video RE[SKIN]ULATE – [ION]TEX

The first phase of the seminar focused on creating new materials or combining existing materials into advanced composites, with a particular focus on bioplastics and kombucha. During the second part of the course students could investigate the augmentation and actuation of the material systems through means of electronics and physical computing.

The final phase was reserved to developing a functional application, working prototype and speculative future scenario, presented through means of video and material catalogues.
SKIN2

What will the human of the future be like? Ray Kurzweil predicts the ‘Singularity’, the progressive amalgamation of the human brain and machine intelligence. Aubrey de Grey understands aging as a disease that can be cured and may lead to infinite life extension. And Zoltan Istvan, who with his ‘Transhumanist Party’ is currently running for US presidency, advocates -among other things- the technological enhancement of the mind and body through robotics and smart devices. Within the context of ‘Humanity +’ we want to explore the possibilities and potential effects of augmenting the self and extending the body. Focusing on the human skin, as a means for protection but also a mediator of our senses and the environment we want to look into ways of creating novel interactions and bodily experiences.  We will work with raw materials and recipes to create thin membranes and surfaces, which will be supplemented through embedded electronics. Besides developing advanced material systems a crucial task will be to think about the practical applications and implications of a second skin.
The first phase of the seminar will focus on creating new materials or combining existing materials into advanced composites. During the second part of the course we will investigate the augmentation and actuation of our material systems through means of electronics and physical computing. The final phase is reserved to developing a functional application, working prototype and speculative future scenario.

output_hFLjzN